Tag Archives: Audiometric testing

Audiometric Testing: Did You Hear That?

Depending on your local health and safety regulatory jurisdiction, audiometric testing will be required once decibels reach a specific action level.  Audiometric testing is part of an organizations overall hearing conservation program that is completed annually, at a minimum.

What is an audiometric test? It is a test to determine a workers’ hearing levels with the help of an audiometer.  Simply put, it is a test to determine how well you can hear, or not hear?  The test will validate if a workers’ hearing is being compromised or not.

Audiometric Testing

Audiometric testing identifies…

–  Progressive noise-induced hearing losses before they become an impairment

–  Temporary losses before they become permanent, providing time for remedial steps

The audiogram is a graphical display of the hearing test. The audiogram (a graph or table of an audiometric test results) will be available to the worker and by the employer.

The two main components that are graphed are frequency and intensity. These results are displayed for each ear. When you had your hearing tested, the audiologist was determining the softest sound you could hear at each specific frequency.  Without regular audiometric testing you may not know your hearing is being compromised until it is too late!

Below are the 4 steps needed to ensure that noise, as an occupational hazard, is monitored and operational controls are in place to minimize or eliminate such noise.

  1. Measure your workplace sound levels to determine who needs to be tested.
  2. Review engineering, administrative and personal protective measures to limit worker noise exposure.
  3. Schedule mobile testing, and provide training for employees affected by noise.
  4. Understand local jurisdictional and other regulatory bodies requirements for noise hazards and maintain compliance.


The examiner will ask you questions as part of the evaluation…

–  Ear, nose, & throat problems such as colds, infections, and congestion?

–  Noisy hobbies or activities?

–  Time since exposure to loud noise?

The examiner may also visually check your outer ear canal with an otoscope for…

–   Ear infections

–   Excessive earwax

–   Obstructions in the ear canal


  • You will sit in a quiet booth and be equipped with a headset and a signal switch
  • You will hear tones of varying level and frequency
  • You will be instructed to depress the signal switch to indicate a tone was heard
  • Be honest; don’t try to anticipate or intentionally miss a tone, or the test will be invalid


Your audiogram will be used to indicate hearing change.

–    A Temporary Threshold Shift (TTS)

  • A temporary reduction in hearing due to fatigue of the ear caused by noise exposure
  • Temporary hearing loss – indicates the potential for permanent loss

–    A Standard Threshold Shift (STS)

  • A change in hearing sensitivity for the worse relative to the baseline audiogram
  • An average change of 10 dB or more at 2, 3, and 4 kHz in either ear

The benefits of participating in an audiometric test include preventing adverse effects such as tinnitus – ringing in the ears; temporary hearing loss or permanent hearing loss.   Noise is an occupational hazard that can be identified, controlled and measured.  Audiometric testing is a validation of how effective an employer’s hearing conservation program is, or is not.


Audiometric Testing: The Various Types of Tests

There are multiple types of audiometric testing to validate if a workers’ hearing health has been jeopardized due to working around noise.  Some of these tests are briefly described in this article.

Audiometric Testing

  1. Pure Tone Audiometry

Pure tone audiometry (PTA) tests are the most common type of test used for evaluation of occupational noise.  During PTA, a machine called an audiometer is used to produce sounds at various volumes and frequencies (pitches). You listen to the sounds through headphones and respond when you hear them by pressing a button.

  1. Speech Perception

The speech perception test, also sometimes known as a speech discrimination test or speech audiometry, involves testing your ability to hear words without using any visual information. The words may be played through headphones or a speaker, or spoken by the tester.  Sometimes, you are asked to listen to words while there is a controlled level of background noise.

  1. Tympanometry

During tympanometry, a small plastic bung seals your ear and the machine gently changes the pressure in your ear canal. The purpose of a Tympanometry test is that it measures the movement of the eardrum and the pressure behind the eardrum to determine if any fluid is behind the eardrum.  It will also indicate if the Eustachian tube is working properly or not normally.

  1. Whispered voice test

The whispered voice test is a very simple hearing test. It involves the tester blocking one of your ears and testing your hearing by whispering words at varying volumes. You will be asked to repeat the words out loud as you hear them.

  1. Tuning fork test

A tuning fork test produces sound waves at a fixed pitch when it is gently tapped and can be used to test different aspects of your hearing.  The tester will tap the tuning fork on their elbow or knee to make it vibrate before holding it at various different locations around your head.

The purpose of the tuning fork test is to help determine if you have conductive hearing loss, or sensori-neural hearing loss.

  1. Bone conduction test

A bone conduction test is often carried out as part of a routine pure tone audiometry (PTA) test in adults.  A bone conduction test involves placing a vibrating probe against the mastoid bone behind the ear. It tests how well sounds transmitted through the bone are heard.  The bone conduction test is a far more sophisticated version of the tuning fork test, and when used together with PTA, it can help determine whether hearing loss comes from the outer and middle ear, the inner ear, or both.

  1. Hearing Test Results – The Audiogram

The results of some hearing tests are plotted on a graph called an audiogram.  An audiogram is used to record the measurements of different volumes and frequencies (pitches) of sounds you are able to hear.  As well as showing a comparison between your ears, an audiogram can also help to determine what type of hearing loss you have, if any.  The type of hearing loss you have is important because it determines what help or treatment is most suitable for you.

Audiometric Testing: The Audiogram

If you have experienced an audiometric test, chances are you have seen and been told the results of your test via a graph.    But did you really understand the information?  Was the information not communicated well to you?  This article will provide, in general terms, an explanation of what an audiogram represents.

The audiogram is a chart of hearing sensitivity with frequency charted on the X- axis and intensity on the Y-axis. Intensity is the level of sound power measured in decibels; loudness is the perceptual correlate of intensity.  Below is an example of an audiogram:

Audiometric Testing

Most common way to measure hearing sensitivity is to measure pure-tone (sinusoid) thresholds.

Below is an example of an audiogram.  The red line is the right ear of this particular worker.  This audiogram represents Pure Tone Average (PTA).  The average thresholds at 500, 1000, 2000 Hz are the frequencies most important for speech understanding .  In this particular scenario, the PTA of the left ear was 93 dB compared to 50 dB of the right ear.

Audiometric Testing

The magnitude of hearing loss is defined as follows:

  • Normal hearing loss:  0 -15 dB.  Some interpretations have normal hearing loss ranging up to 25 dB
  • Slight hearing loss:  16-25 dB
  • Mild hearing loss:  26-40 dB
  • Moderate hearing loss:  41-55 dB
  • Moderately-Severe hearing loss:  56-70 dB
  • Severe hearing loss:  71-90 dB
  • Profound hearing loss:  91+dB

There are 3 types of Hearing Loss to understand when reviewing your audiogram:

  1. Conductive is abnormality of the outer or middle ear.  Usually temporary and medically treatable.The Impaired Ear (Conductive Loss) occurs when there is a disruption of the transmission of sound (Ex: fluid in the middle ear).  Typically, this loss occurs in the outer or middle ear and many times is a temporary loss that can be treated medically.
  2. Sensorineural is damage to the inner ear or nerves of hearing.  Usually permanent. The Impaired Ear (Sensorineural Loss) occurs for many reasons.  Starting from age 20, the hair cells slowly begin to deteriorate.  Hair cells can also be damaged from loud noises, medicine, head trauma or other causes.  This type of hearing loss are mostly due to natural loss of hair cells.
  3. Mixed include both Conductive and Sensorineural.


Besides just understanding the audiogram, it is important to remember that audiometry is a subjective test requiring a verbal or physical response and therefore can be subjective.  Audiometry tests all parts of the ear, the entire auditory system.  The most common type of audiometry, that you and I are familiar with is the Pure Tone audiometry test.  This type of test includes headphone, insert earphone or speaker.  A machine called an audiometer is used to produce sounds at various volumes and frequencies (pitches).You listen to the sounds through headphones and respond when you hear them by pressing a button.This test evaluates the sensitivity of the entire hearing organ.  The audiologist presents single frequency (“pure”) tones produced by a calibrated audiometer. The softest sounds heard by the subject at each pitch are recorded as the thresholds and are compared to normative values.  This recorded comparison is found on the audiogram, a graph that you now understand what it means and how it benefits you by knowing what type, if any hearing loss you may have.  The type of hearing loss you have is important because it determines what help or treatment is most suitable for you.

Audiometric Testing: Benefits of Testing

When occupational noise hazards exceed the exposure standard indicated in occupational health and safety requirements, workers are required to use Personal Hearing Protection (PHP) to reduce the risk of hearing loss. These workers are also required to participate in audiometric testing to ensure the effectiveness of the hearing protection measures.

This audiometric testing may be required annually or every two years, once again depending on your local occupational safety jurisdictional requirements. This article discusses the benefits of audiometric testing and defines exactly what audiometric testing involves.

Audiometric Testing


Audiometric testing determines workers’ hearing levels with the help of a tool called an audiometer. It is a very simple procedure that involves an employee receiving a series of different tones; for each tone, the participant can respond indicating that they heard the tone.

The tones are presented at different sound levels and checked multiple times to identify the lowest level at which a person can hear. This is called the “threshold limit,” and is compared to a “baseline test.” Audiometric testing is conducted for different frequencies, and both the left and right ears. As a result, it provides a way to monitor the sharpness and acuity of an employee’s hearing over time.

In particular, audiometric testing identifies:

(1) Progressive noise-induced hearing loss before it becomes an impairment.

(2) Temporary loss before it becomes permanent, providing time to implement remedial steps.


To effectively conduct an audiometric test, the test environment must be controlled. In particular, the optimal test environment must be quiet and free of distractions. There should be no distracting activity outside the test room that the listener can see or hear. The listener needs to focus their attention on the test and not any activity surrounding them. For example, while audible speech would not mask the test tones, it would distract the listener.

While there is no such thing as a “soundproof” test room – i.e., a room which no outside sound can penetrate – it is important that rooms are designed to reduce outside noise to the point where it won’t mask the test signals, and it is just as important to not have unnecessary noise-generating activities in the area of the test room.


Regularly scheduled audiometric testing identifies people who are at risk of significant hearing loss by identifying changes in their hearing threshold over time. Employers can then implement appropriate treatment plans, like providing a higher class of hearing protection, ensuring that the employee uses hearing protection correctly, and reducing the noise in particular locations.

Audiometric testing is best conducted at least a few hours into an employee’s shift to identify any Temporary Threshold Shift (TTS). Temporary Threshold Shifts can show that the Personal Hearing Protection and noise reduction strategies are not working effectively and that immediate corrective action is required.

Typical hearing loss as a result of Noise Induced Hearing Loss (NIHL) often occurs at the 3K, 4K & 6K frequencies where a V shape notch is observed when viewed on the audiometric graph, known as an audiogram.

Audiometric testing may also assist in identifying the need for diagnosis of potential medical problems, distinct from workplace hearing loss, that affect a person’s ability to hear.

Identify Issues Early With a Painless Hearing Test

You possibly think you do not need to see an audiologist for a hearing test despite being advised to do so by people around you. You must understand that routine checks can help to diagnose potential problems in their early stages and give you information about the options available to you to deal with them. Hearing loss is definitely not curable, but it can certainly be managed with specific devices designed for listening and for the issues of the patient.

Hearing Test

When You Should Consider Having A Hearing Test

It will be a good idea for you to have an appointment with an audiologist if you are dealing with any of the problems mentioned below:

  • You have trouble falling the presentation of a speaker because you can’t understand what is being said.
  • You have a history of hearing loss within the family.
  • You are constantly asking people to repeat themselves.
  • You have trouble understanding people next to you in a crowded room or a restaurant.
  • Your family is complaining that you have the audio equipment in the home too loud.
  • You are having a difficulty understanding what people are saying.
  • You frequently hear ringing or buzzing in your ears.

You do not have the fear if you have scheduled an appointment with an audiologist because the examination will be simple and painless and be conducted to understand how well you are able to hear sounds and words at different levels of volume. The audiologist will only be looking forward to determining how your ears are functioning during the examination. It is quite possible that your regular doctor may consider checking your ears for wax and other physical issues if you have scheduled an appointment with him or her.

Your audiologist will also want to know about your medical history, especially if you have a history of hearing loss within your family. Information about your listening habits, working in a loud environment or whether you have been exposed to excessive noise will also be sought after. Your doctors may consider looking inside your ears to identify any physical issues, which could be affecting you. You will be advised to undergo further audio tests after you have gone through the physical examination.

There are a number of tests that can determine or assess how well you are hearing. You will be required to go through an entire list of different test before a final determination is made whether you need remedial action immediately or can wait for some time. The determination will be made after looking at the severity of your condition.

A hearing test is a simple procedure, which will help you prepare for the future in case you are afflicted by hearing loss. It is as simple as audiometric testing, which is commonly used in many workplaces. It is quite possible for you to feel that you do not need to go through this process because you would be able to manage the situation easily. However, you must understand it is somewhat distressing to deal with hearing loss because if you are required to use aids of some kind, it will be a matter which would make you feel you would have done better by consulting an audiologist earlier. Therefore, if you need the tests, you should not be looking forward to ignoring them but should rather prefer finishing the tests at the earliest.

Learn how to prevent hearing loss at work with the help of audiometric testing and how it works.